LiFePo4 Cell 100ah 3.2v Heavy Duty Terminal 200A discharge

(1 customer review)

$155.00

  • The shipment of cells is delayed by congestion at the port of LA.
  • The boat is not expected to unload until the end of December

 

  • Discounts: 10% Discount on 8+ Cells, 12% Discount on 16+ Cells
  • Free Shipping by UPS ground to 48 states
  • Minimum Capacity: 100ah.
  • Continuous Discharge current: 200A (2C).
  • Standard Charge current: 50A (0.5C).
  • Heavy Duty threaded stud terminals.
  • Use 4 cells plus a BMS to build a 12v nominal battery pack.
  • It is very important to use a BMS to manage these cells!

Available on backorder

Name Range Discount
Quantity Discount on Cells: 8 - 15 10 %
Quantity Discount on Cells: 16 - 64 12 %

Bus Bars:

All orders of 4+ cells include 6 standard short bus bars in each 4 pack of cells.
Each Cell includes 2 M10x1.25 Nylock Nuts.
Long bus bars join cells end-to-end, Short bus bars join cells side-to side.
Add optional Extras? (Enter a quantity for each)

Category:

Description

This is a Lithium-Iron-Phosphate (LiFePo4) Cell for DIY battery assemblies.

Used for solar energy storage.

These are A-grade cells, load tested and balanced at the factory. guaranteed capacity is at least 100ah and internal resistance less than 1 milliohm.

Typically, 4 of these cells will be wired in series with a Battery Management System board (BMS) to create a 12 volt battery,
8 cells for a 24v battery, or 16 cells for a 48v battery (with a suitable BMS)

Heavy Duty threaded stud terminals make it easy to assemble.

The plastic frame protects the terminals from short-circuiting and helps organize the connections.

It is very important to use a BMS to manage these cells!
The cells are easily damaged by over charging, over discharging, over/under temperature, and especially low temperature charging.
Use a BMS that monitors each cell individually and has a low-temperature cutoff.

Balancing: These cells are balanced from the factory (per shipment). We have tested this claim and found that they will reliably charge all the way up to 3.500v per cell in a 4,8, or 16 cell pack before any one cell exceeds 3.650v . In other words, we were able to charge every pack to 99.99% capacity without a manual balancing procedure.

Specifications:
Minimum Capacity: 100ah
Nominal Voltage: 3.2v per cell
End-of-charge Voltage: 3.65v per cell
End-of-discharge Voltage: 2.2v per cell
Max Continuous Discharge current: 200A (2C)
Max Discharge Surge: 500A under 5 seconds
Standard Charge current: 50A (0.5C)
Max Charge current surge: 100A (1C) under 10 seconds
Charging Temperature: 0 to 50?
Discharging Temperature: -10 to 50?

Dimensions: Height 11.5″, Width 5.25″, Thickness 1.5″
Weight: 5.85lb per cell

Additional information

Weight 6 lbs
Dimensions 12.5 × 6 × 1.5 in
Bundled pricing

Single cell, 4 Cells with Bus bars, 8 Cells 10% discount, 16 Cells 12% Discount

1 review for LiFePo4 Cell 100ah 3.2v Heavy Duty Terminal 200A discharge

  1. mrking77 (verified owner) –

    I don’t normally leave reviews for product I purchase, but the one really deserved some attention.
    I recently purchase 8 of these cell with a BMS to build a 8s-24 volt battery for my inverter. it was put to the test this week when hurricane Zeta hit the south east united states and we lost power for a day .my battery ran my refrigerator ,coffee maker, 2 television an air fryer for 20 mins ,lights , from 6.45 am to 4.20 pm that day. I am very impressed with the longevity of these cells. The only flaw I see with it is I need more batteries.
    thank you for a good product

Add a review

Your email address will not be published. Required fields are marked *