16s BMS 100a LifePo4 Battery Management System for 48v DIY Batteries, Programmable, Bluetooth Included.

$131.00$153.00

  • Includes a Bluetooth communication module.
  • BMS For 16 cell, 48v volt Lithium-iron-phosphate DIY batteries
  • 100 amp continuous charge or discharge current
  • Low Temperature Charging cutoff at 0c
  • Fully programmable with IOS app, Android app, or Desktop app
Clear

The high current wires will be hydraulically crimped into a single tinned copper lug on each side. – Not available with the no-wires option.

SKU: 16sBMS Category:

Description

User Manual: Click here to download the manual (PDF)

3D model: click and drag to rotate, or download the STEP file.

BMS For 16 cell, 48v volt Lithium-iron-phosphate DIY batteries.
100 amp continuous charge or discharge current.
Low Temperature Charging cutoff at 0c.
The Apps allow you to monitor SOC (state of charge), Current, Voltage, cell balance, temperature, and more.

Bluetooth Module is included, Balance wires are included, USB module is an additional purchase.
Fully programmable.

If you choose to add crimped copper lugs, the high current wires will be hydraulically crimped into a single tinned copper lug on each side, and finished with heat shrink tubing.

Final assembly, testing and calibration is done in Naples, Florida. Units with 8 gauge wires and/or crimped lugs are assembled in Denver, CO or Naples,  FL. The BMS is manufactured in China.

To view or change Parameters, there are 3 ways to connect to the BMS.
1. Bluetooth module to IOS app. The app is on the Apple app store, it is free to view operational data, but costs $6 to view and change parameters.
2. Bluetooth module to Android app. (download this version, don’t get it from the play store)
3. USB module to PC/desktop application. This application is free

IOS app is on the Apple app store. Search for “xiaoxiangBMS

Click here for Software Downloads and Support Resources.

A great resource for general DIY power education is www.Mobile-Solarpower.com

FYI for experimenters: The BMS communicates with a 5v TTL UART at 9600 baud. It is directly compatible with Arduinos, etc.
We have written a new Arduino library for the BMSs, now available on the downloads page. The beta version allows you to read all the monitoring parameters and switch charge and discharge on/off. Future releases will have full read/write capability. A python library is also in the works.

Additional information

Weight 1.5 lbs
Dimensions 6 × 6 × 1 in
Wire Length

8ga 12" (standard), 8ga 24" (+$8), No Wires (-$14)

Reviews

There are no reviews yet.

Be the first to review “16s BMS 100a LifePo4 Battery Management System for 48v DIY Batteries, Programmable, Bluetooth Included.”

Your email address will not be published. Required fields are marked *