8s BMS 100a LifePo4 with 24″ 8ga Wires

$148.94

  • Comes with 24 inch long 8ga wires soldered to the board as shown.
  • BMS For 8 cell, 24v volt Lithium-iron-phosphate DIY batteries
  • 100 amp continuous charge or discharge current
  • Low Temperature Charging cutoff at -1c (2 probes)
  • Remote shutoff switch
  • Fully programmable with IOS app, Android app, or Desktop app
  • User Manual: Click to Download the PDF user manual
  • Also available with 12″ Wires, M6 Threaded Terminals, or Nothing

In Stock, Ships within 5 Days

The high current wires will be hydraulically crimped into a single tinned copper lug on each side.

Communications

1 Bluetooth module is included with each BMS.

You may want to add a USB communication module and a M6 Hardware kit.

SKU: 8s100a8ga24 Categories: ,

Description

User manual: Click here to download the manual (PDF)

3D model: click and drag to rotate, or download the STEP file.

BMS For 8 cell, 24v volt Lithium-iron-phosphate DIY batteries.
100 amp continuous charge or discharge current.
Low Temperature Charging cutoff at -1c.
The Apps allow you to monitor SOC (state of charge), Current, Voltage, cell balance, temperature, and more.

This unit has a connection for a remote shutoff switch. Useful for storage or security.

Bluetooth Module is included, Balance wires are included, USB module is an additional purchase.
Fully programmable.

If you choose to add crimped copper lugs, the high current wires will be hydraulically crimped into a single tinned copper lug on each side, and finished with heat shrink tubing.

Final assembly, testing and calibration is done in Naples, Florida. Units with 8 gauge wires and/or crimped lugs are assembled in Naples,  FL. The BMS is manufactured in China.

 

Example of a complete 8 cell battery with BMS:

Example 8s Battery

Click here for detailed assembly instructions for this battery. PDF

To view or change Parameters, there are 3 ways to connect to the BMS.
1. Bluetooth module to IOS app. The app is on the Apple app store, it is free to view operational data, but costs $6 to view and change parameters.
2. Bluetooth module to free Android app. (download this version, don’t get it from the play store)
3. USB module to PC/desktop application. This application is free

IOS app is on the Apple app store. Search for “xiaoxiangBMS

Click here for Software Downloads and Support Resources.

A great resource for general DIY power education is www.Mobile-Solarpower.com

FYI for experimenters: The BMS communicates with a 5v TTL UART at 9600 baud. It is directly compatible with Arduinos, etc.
We have written a new Arduino library for the BMSs, now available on the downloads page. The beta version allows you to read all the monitoring parameters and switch charge and discharge on/off. Future releases will have full read/write capability. A python library is also in the works.

Additional information

Weight 2 lbs
Dimensions 6 × 4 × 1 in
Wire Size:

10 gauge x 12" (Discontinued), 8 gauge x 12" (+$6), 8 gauge x 24" (+$14), No wires (-$8), M6 Threaded Terminals (Standard)

Reviews

There are no reviews yet.

Be the first to review “8s BMS 100a LifePo4 with 24″ 8ga Wires”

Your email address will not be published. Required fields are marked *

You may also like…