8s BMS 100a LifePo4 without Wires

$128.14

  • Without wires soldered to the board. You will need to solder your own wires.
  • Do not bolt connections directly to the circuit board.
  • BMS For 8 cell, 24v volt Lithium-iron-phosphate DIY batteries
  • 100 amp continuous charge or discharge current
  • Low Temperature Charging cutoff at -1c (2 probes)
  • Remote shutoff switch
  • Fully programmable with IOS app, Android app, or Desktop app
  • User Manual: Click to Download the PDF user manual
  • Also available with 12″ Wires, 24″ Wires, or Threaded Terminals

In stock in Florida, Ships within 2 Days

Free Shipping

All domestic BMS orders ship for free via Priority Mail.

International shipping cost will be calculated at checkout.

Communications

1 Bluetooth module is included with each BMS.

You may want to add a USB communication module

Related Products

Do your cells have M6 terminals? Check out the M6 Hardware kit.

Cut-to-Length wire and custom crimped wire assemblies are now available

SKU: 8s100NoWire Categories: ,

Description

User manual: Click here to download the manual (PDF)

BMS For 8 cell, 24v volt Lithium-iron-phosphate DIY batteries.
100 amp continuous charge or discharge current.
Low Temperature Charging cutoff at -1c.
The Apps allow you to monitor SOC (state of charge), Current, Voltage, cell balance, temperature, and more.

This unit has a connection for a remote shutoff switch. Useful for storage or security.

Bluetooth Module is included, Balance wires are included, USB module is an additional purchase.
Fully programmable.

Final assembly, testing and calibration is done in Naples, Florida. Units with 8 gauge wires and/or crimped lugs are assembled in Naples,  FL. The BMS is manufactured in China.

 

Example of a complete 8 cell battery with BMS:

Example 8s Battery

Click here for detailed assembly instructions for this battery. PDF

To view or change Parameters, there are 3 ways to connect to the BMS. All 3 applications are free.

Click here for Software Downloads and Support Resources.

A great resource for general DIY power education is www.Mobile-Solarpower.com

FYI for experimenters: The BMS communicates with a 5v TTL UART at 9600 baud. It is directly compatible with Arduinos, etc.
We have written a new Arduino library for the BMSs, now available on the downloads page. The beta version allows you to read all the monitoring parameters and switch charge and discharge on/off. Future releases will have full read/write capability. A python library is also in the works.

Additional information

Weight 1 lbs
Dimensions 6 × 4 × 1 in
Wire Size:

10 gauge x 12" (Discontinued), 8 gauge x 12" (+$6), 8 gauge x 24" (+$14), No wires (-$8), M6 Threaded Terminals (Standard)

SKU 8s100NoWire
Product ID 5008215

Reviews

There are no reviews yet.

Be the first to review “8s BMS 100a LifePo4 without Wires”

Your email address will not be published. Required fields are marked *